top of page

Personal Emergancy

Response

System (PERS)

Personal Emergency Response Systems (PERS)

Hartman Security Offers these PERS Alarm Systems:

  1. LogicMark – LifeSentry

  2. Linear® - PERS-2400B

​

LifeSentry with a Revolutionary Two-Way Voice Pendant

​

LifeSentry offers the BEST RANGE in the industry: It allows you to communicate your emergency message instantly from within many hundreds of feet from the base station. The system should cover an average American home and well into the front, back and side yards.

​

The Pendant is water resistant and allows the wearer to summon help even if you are in the bath or shower, where serious accidents can happen. The pendant and Emergency Wall Communicator meet the IPX-5 water spray test.

​

The Pendant can be worn three convenient ways. Included with each system are a Lanyard, a Wrist/Wheelchair Strap holder and a Belt Clip.

​

The System is fully supervised the pendant checks in with the base station every 13 hours to confirm its battery status and that it is functioning. In the event of, power loss, a very low battery or loss of RF signal – the base will relay the information to the central station.

​

The system has Standby Emergency Battery Power 4 NiMh rechargeable batteries continually charge in the base station to provide up to 24 hours of standby power in the event of a power failure.

​

For more information and to view the LifeSentry Kit: Model #37911 visit LifeSentry

​

LINEAR®, PERS-2400B: Personal Emergency Reporting System

​

The Personal Emergency Reporting System or PERS is a supervised wireless emergency reporting product designed for personal use. The tabletop or wall-mount Console provides pushbutton emergency assistance to anyone who desires additional security and peace of mind. For the visually impaired, each button on the Console is molded with Braille characters to identify the button’s function.

​

The large EMERGENCY button on the face of the Console or a wireless transmitter can trigger the emergency alarm. The optional activity timer can be set for 8, 12 or 24-hour operation. The emergency alarm will trigger automatically if the time set elapses before an activity transmitter is triggered or the Console’s HOME button is pressed.

​

The Console’s digital communicator can route calls to three telephone numbers: primary, secondary, and supervisory. General reporting codes and individual sensor reporting codes are programmable for the 4×2 format.

​

Powered by a low voltage plug-in transformer, the Console has provisions for a rechargeable backup battery for operation during AC power outages. A power switch allows for out-of-service storage of the Console without discharge of the battery. The battery is recharged and supervised by the Console. If the backup battery becomes low the POWER light will flash and the condition can be reported to the central station. Linear®

​

Features

  • Two-way voice capability (with optional VB-4B voice board)

  • Suitable for temporary or permanent installations

  • Braille characters for EMERGENCY, HOME, and CLEAR buttons

  • Speakerphone capability (with optional VB-4B voice board)

  • Delayed, silent alarm feature

  • Selectable inactivity reporting: 8, 12, or 24 hours

  • Selectable two-way voice activation (with optional VB-4B voice board)

  • Single telephone seizure and true phone line seizure capability

  • Distinct alarm tones provided for emergency and fire alarm conditions

  • Power on/off switch

  • Capacity for up to 16 DX/DXS transmitters

  • Point ID communicator reporting

  • Programmable with Windows-based RA-2400 Software

  • Installs in minutes

  • UL listed per standard 1637

  • DX and DXS format

  • Operating Frequency: 315 MHz

  • Backup battery size: 12 volts, 1.2 Amp/hour (32 hour backup)

  • 7.5″ W x 8.75″ H x 3″ D

bottom of page